top of page

Type of fire


Fire classification knowledge

Class A fire

The most common fire phenomenon in the Uzbekistan, paper, wood products, fiber products, quilts, plastics, synthetic rubber, resin and other solid products can burn out the remaining material products. Usually building fires fall into this category.


-Fire extinguishing method: The temperature of the burning material can be lowered by the cooling effect of water or aqueous solution, so as to achieve the fire extinguishing effect.

Class B fire

Disasters on highways, such as the overturning of a tourist bus and sparks, or a series of car accidents, are very common oil fires.

Types can be divided into: petroleum, ethane gas, acetylene gas, flammable grease paint.
Usually building fires fall into this category.


— Extinguishing method: Isolate oxygen by covering up and suffocate it. In addition, the fire extinguishing effect can be achieved by removing combustible materials or lowering the temperature.

Lida fire extinguishers can directly biologically decompose oily substances to achieve a faster fire fighting method to ensure the safety of the victims.

Class C fire

Electrical fires and accidental misfires in household electrical wiring may cause irreparable regrets. Recently, there have been publicizing how to properly prevent this type of disaster from occurring.

Types can be divided into: electrical equipment that is energized, such as electrical appliances, motors, engines, transformers, wires, mobile phones, televisions, or other household appliances, etc., are all electrical fires.


— Extinguishing method: cut off the power first and then extinguish the fire according to the type A or B depending on the situation. If you cannot accurately determine the cause of the fire, please use non-conductive fire extinguishing agents or special nozzles and hose fire extinguishers to control the fire.


Lida fire extinguisher can reach the standard of extinguishing high-voltage electrical fire in a short time.

bottom of page